HEPYC | END MILL HSSE DIN885D

Ref. 31510

END MILL HSSE DIN885D

P				M		K			N				S		H
>800	>1.000	>1.200	>1.400	>950	>1.200	>500	>800	>1.400	Al	Cu	Mg/Zn	Plastic	Ti	Ni	50 HRC	55 HRC	60 HRC
30-40	15-25	15-20				30-35	15-25			30-100	50-90

Technical Features:

Soft magnetic steels, construction and cementation steels, and non-alloy and alloy carbon steels up to a strength of 1,100 N / mm2

Code	Ø (mm)	L (mm)	l (mm)
31510063004	63.00x4	--	22	z 18	1
31510063005	63.00x5	--	22	z 18	1
31510063006	63.00x6	--	22	z 18	1
31510063008	63.00x8	--	22	z 18	1
31510063010	63.00x10	--	22	z 18	1
31510080004	80.00x4	--	27	z 20	1
31510080005	80.00x5	--	27	z 20	1
31510080006	80.00x6	--	27	z 20	1
31510080008	80.00x8	--	27	z 20	1
31510080010	80.00x10	--	27	z20	1
31510080012	80.00x12	--	27	z 20	1
31510100006	100.00x6	--	32	z 24	1
31510100008	100.00x8	--	32	z 24	1
31510100010	100.00x10	--	32	z 24	1
31510100012	100.00x12	--	32	z 24	1
31510100014	100.00x14	--	32	z 24	1
31510125006	125.00x6	--	32	z 24	1
31510125008	125.00x8	--	32	z 24	1
31510125010	125.00x10	--	32	z 24	1
31510125012	125.00x12	--	32	z 24	1
31510125014	125.00x14	--	32	z 24	1
31510125016	125.00x16	--	32	z 24	1